Clearfox Windows

Clearfox Windows · Planning guides

Window aftercare and service-contact record

By JR Digital Services editorial team · Published 6 November 2026

Blank white paper on a clipboard with a pen and pencil on a dark surface
Photo shown in full and resized for this page.

Swipe tables sideways to see every column.

Illustrative stock photograph of blank stationery. Photo: KATRIN BOLOVTSOVA. Pexels License.

Why keeping a window aftercare record matters

Once new windows are installed, the most useful thing you can do is record the care instructions specific to each product and note exactly where to direct any future concerns. Different glass types, frame materials and coatings each have different cleaning requirements, and the correct point of contact for a service question depends on who supplied and installed the windows. Without a simple record, that information is easily lost.

This article is for homeowners who want to organise their aftercare information after installation — not a universal procedure or a checklist that applies to every product.


Finding the correct instructions for each installed product

Not all windows in a home are the same product. A set of aluminium awning windows may sit alongside a large fixed panel of a different glass specification. The care instructions relevant to one may not apply to the other.

Manufacturers produce cleaning guides specific to their glass types. Viridian’s Glass Cleaning Guide, for example, notes that “in addition to the general cleaning guidelines offered within this document, there are specific recommendations for certain glass types” and that cleaning methods differ between uncoated glass, heat-treated glass, ceramic printed and painted glass, Low-E coated glass and mirror products. The guide recommends seeking advice from professional window cleaners or reputable glazing companies rather than assuming a single method covers all surfaces.

The practical step is to record — for each distinct window type or glass specification in your home — which manufacturer’s guide applies, where to find it (a URL, a document kept with your paperwork, or both), and any product-specific notes from your installer at handover.

Questions worth asking your installer at handover:

  • What glass type or specification is in each window?
  • Is there a manufacturer cleaning guide for each product?
  • Are any surfaces coated in a way that requires a different cleaning method?
  • Is there anything that would void the product warranty if used for cleaning?

Understanding why glass type changes the care approach

The reason glass-specific instructions matter is that some surfaces are genuinely more vulnerable than others, and damage from incorrect cleaning can be permanent. Viridian’s guide warns that heat-treated glass may have fine glass dust particles adhered to the surface from the manufacturing process, making blade use inadvisable — the dust can drag across the surface and cause permanent scratching. The same guide states that for Low-E coated glass, the coated surface can mark and appear scratched if contacted with framing tools, and that alkaline or alcohol-based cleaning solutions may leave visible streaks on the coating.

These are product-specific cautions that would not appear in a generic cleaning guide. Recording which products are in your home and keeping the relevant manufacturer documents helps you find their care information when you need it.


Keeping a WERS certificate with your records

For WERS-rated windows, AGWA recommends retaining the certificate because it identifies the window or door specification and can inform future repairs or glass replacement.

This is a practical reason to file energy rating documents alongside other window records rather than treating them as one-time approval paperwork. If glass is ever broken or a sealed unit fails, the certificate describes the original specification — which matters for like-for-like replacement.


Recording ongoing care questions for the supplier

A care record is most useful when it includes not just instructions but also the contact details for the right person to call if something changes. This typically means:

  • The window manufacturer’s customer service contact (for product-specific queries about coatings, hardware or glass)
  • The installer’s contact details (for queries about installation, seals, flashings or operation that relate to the work carried out)
  • The warranty reference number or document, and what it covers

In South Australia, building work contractors — including those whose licence is limited to aluminium window and door installation — must hold a building work contractor’s licence. SA.gov.au confirms that a contractor’s licence can be limited to specific work such as aluminium window and door installation. If you have a future concern that relates to the installation itself, confirming the installer’s licence details and keeping them on file means you have the right starting point.


Describing a concern when requesting service

When something appears wrong with a window after installation — a draught, difficulty operating a handle, water appearing at the sill, or a mark on the glass that doesn’t clean off — the description you give when raising a concern directly affects how quickly it can be assessed.

A useful description covers:

  • Which window (location in the home, orientation, type)
  • When the issue first appeared (immediately after installation, after a particular weather event, after cleaning)
  • What you observed (not a diagnosis — a description of what you can see or feel)
  • What you’ve already tried, if anything

Hypothetical scenario for illustration only: Imagine a homeowner notices a streak on a large fixed glass panel that doesn’t respond to cleaning. Without knowing the glass specification, they might attempt a cleaning product that is unsuitable for the coating. With a care record on file, they can check the manufacturer’s guide first and raise the concern with the correct contact — describing the glass type, the cleaning product used and the result — rather than starting from scratch.

This scenario is illustrative. It does not represent a specific installation outcome or predict what a particular concern would involve.


Keeping a dated record of contact and advice

When you do contact a supplier, installer or manufacturer about a window concern, keep a brief written note of:

  • The date of contact
  • Who you spoke with or emailed
  • What you described
  • What advice was given
  • Any follow-up action agreed

This record is useful if a concern escalates, if the advice changes, or if a warranty claim becomes relevant. It does not need to be elaborate — a dated note in a folder with your other window documents is sufficient.


Linking back to handover documents without repeating the checklist

Your aftercare record works best as a companion to the documents you received at handover, not a replacement for them. The window installation handover checklist covers what should be provided at that point — compliance certificates, operation demonstrations and warranty documents. The aftercare record builds on that foundation by adding the ongoing care instructions and service contacts specific to your products.

If you are still at the planning or quotation stage, the window replacement process explained and window quote schedule explained guides cover earlier steps. For specific performance questions about your glass specification, the WERS rating explained guide is a useful reference.

If you would like assistance finding a window supplier or installer in Adelaide to discuss aftercare or a service concern, you are welcome to submit an enquiry and we will refer you where available.


Further reading

Got a question this didn't answer?

Describe your project and ask a provider to confirm availability, assessment scope and fees.

Project enquiry Call Now