Clearfox Windows · Planning guides
Window quote schedule explained
By JR Digital Services editorial team · Published 6 November 2026
Swipe tables sideways to see every column.
Illustrative stock photograph of blank stationery. Photo: KATRIN BOLOVTSOVA. Pexels License.
What does a window quote schedule actually tell you?
A window replacement quote schedule is the itemised table inside a quote that lists each opening individually — not just a lump-sum price. Reading it carefully lets you verify that every window in your home has been counted, that the product described for each opening matches what you asked for, and that you understand what the contractor is not including before you compare one quote against another.
Matching opening references to rooms and drawings
Most schedules assign each window a reference code — often a number, a letter–number combination, or a room abbreviation with a sequence (e.g. BED2-W1, or simply W07). These codes should correspond to either a floor plan supplied with the quote or the notes the measurer made during the site visit.
Before you read anything else, check that the total count of line items matches the number of windows you expect to replace. It is easy for an opening to be omitted — particularly a highlight window above a door, a narrow bathroom casement or a fixed panel beside a sliding door — especially if the measurer was working quickly or access was awkward.
If you do not have a marked-up floor plan, ask the supplier to annotate one or describe each reference by room name and position (e.g. north-facing, street side). Without this, you cannot confidently compare two quotes that may be counting different openings.
Hypothetical illustration (not a customer story): Imagine a homeowner receives two quotes for a whole-house replacement. Quote A lists 14 items; Quote B lists 11. The difference is not necessarily price — Quote B may simply have grouped the three bathroom windows as one line item, or excluded the laundry louvre entirely. No comparison of totals is meaningful until the opening counts align.
Reading the proposed frame and glazing descriptions
Each line item in a schedule typically carries a short product description. This usually includes the frame material (aluminium, uPVC or timber), the window operation type (sliding, awning, casement, double hung, fixed), the frame colour, and the glazing specification.
The glazing description is where close reading matters most. Single glazing and double glazing (an insulated glass unit, or IGU) may look similar in abbreviated form. A quote might read “6mm clr” (6 mm clear single pane) or “6/12/6 LowE” (a double-glazed unit with a 12 mm cavity and a low-emissivity coating). These are very different products with different thermal performance and different costs.
The AGWA Guide to Window and Door Selection notes that compliance with energy efficiency provisions requires window performance data to be determined in accordance with Australian Fenestration Rating Council (AFRC) guidelines, and that the Window Energy Rating Scheme (WERS) provides a framework for assessing fenestration products for energy efficiency performance. If your project has an energy report or NatHERS requirements, the schedule should reference how each specified product meets those requirements — not just describe the glass by thickness and colour.
If the schedule lists a WERS-rated product, the AGWA guide notes that to verify compliance you should check that the glass description and frame description in the quote match the product listing in the WERS Certified Product Directory. Ask your supplier to identify the relevant WERS listing if you have energy performance targets to meet. You can search the WERS product directory at werslink.com.au.
See also our related guide on WERS ratings explained for a plain-English explanation of Uw and SHGCw values.
Separating product supply from installation work
A quote schedule may price the window product separately from the labour and associated work, or it may bundle them. Either approach is legitimate, but you need to know which applies before interpreting the figures.
In South Australia, the sa.gov.au builder responsibilities page confirms that a building work contractor’s licence can be limited to specific work — including aluminium window and door installation — and that all building work must be supervised by a registered building work supervisor. This means the entity supplying windows and the entity installing them may be different licensed parties, and the schedule should make clear which costs belong to whom.
Check whether the installation line includes:
- Removal and disposal of existing frames and glass
- Making good to reveals, renders or plasterwork after removal
- Flashing and sealing (which the AGWA Guide to Window and Door Selection identifies as a key installation interface)
- Hardware, insect screens or flyscreens
- Touch-up painting or powdercoat matching
If these items are not listed, ask the supplier to confirm in writing whether each is included or excluded. Do not assume an absence means either omission or inclusion until you have a written response.
Finding exclusions and provisional items
Most professional quotes include an exclusions or qualifications section, sometimes buried below the schedule table. Common exclusions in window replacement work include:
- Structural or framing repairs discovered after old windows are removed
- Asbestos-containing materials — the sa.gov.au builder responsibilities page states that contractors should check for asbestos before starting work on a new job, and that any asbestos removal should be done by a licensed professional. Before signing, ask your contractor: does your pre-start asbestos check cover all wall and reveal areas that will be disturbed, and what is your procedure and pricing if asbestos-containing material is discovered during removal?
- Council or development approval fees, if applicable to your project
- Re-keying or security hardware beyond standard latches
- Screen doors or security screens (sometimes quoted separately)
Provisional sum items — where the quote names a specific cost but notes it may change based on site conditions — should be read as estimated, not fixed. The sa.gov.au domestic building contracts page notes that provisional sums give an estimate for specific costs of building work and are a permissible contract clause. If a provisional sum is included, ask what conditions would cause it to increase and by how much.
Recording clarifications before comparing totals
Once you have read all schedules against the same opening count, confirmed the product descriptions are equivalent, and noted the exclusions, you are in a position to compare quotes meaningfully. Before that point, a lower total figure may simply reflect a shorter scope.
A useful pre-comparison checklist (for your own note-taking — not a mandated industry document):
| Question | Quote A | Quote B |
|---|---|---|
| How many openings are listed? | ||
| Is glazing spec stated per opening? | ||
| Is removal included? | ||
| Is making-good included? | ||
| Are screens included? | ||
| Are provisional sums identified? | ||
| Is flashing/sealing in scope? | ||
| Is asbestos discovery procedure addressed? |
Bring your written clarifications to the supplier before accepting any quote. A reputable contractor should be willing to annotate the schedule to answer each question. If responses come verbally only, request them in writing — the sa.gov.au builder responsibilities page states that domestic building work above a certain value requires a clearly written contract showing the business name and licence number of the contractor.
For context on what happens after you accept a quote, see our guide to the window replacement process in Adelaide, and for how the measurement visit informs the schedule, see window measurement visit preparation.
Further reading
- AGWA Guide to Window and Door Selection — agwa.com.au
- SA Government — Builder responsibilities (domestic building contracts and licensing) — sa.gov.au
- WERS product search — werslink.com.au
- SA Government — Building work contractor’s licence — sa.gov.au
If you would like a referral to a window replacement supplier who can walk you through a detailed opening schedule for your Adelaide home, use our enquiry form to request follow-up where available.