Clearfox Windows · Planning guides
Window water-leak assessment
By JR Digital Services editorial team · Published 6 November 2026
Swipe tables sideways to see every column.
Illustrative stock photograph, not a local project or provider’s work. Photo: Curtis Adams. Pexels License.
Noticing water where it shouldn’t be near a window is unsettling, but what you do before anyone visits can make a genuine difference to how quickly the cause is narrowed down. The most useful thing a homeowner can do is record observations carefully — when water appears, exactly where it is, and under what conditions — without jumping to a conclusion about why it is happening.
Why separating observation from cause matters
Water appearing near a window can originate from several entirely different sources, and many of them share surface appearances. The AGWA Guide to Residential Installation (hosted by Southern Star Windows) notes that installation problems are a prime cause of leaks in window assemblies, citing factors such as the loss of continuity in the water barrier and the exposure of windows to wind and rain without adequate flashing. At the same time, the Australian Government’s YourHome resource explains that condensation — a physically different phenomenon — forms when humid air meets a cooler surface such as a window, and can lead to damp, mould and apparent water on or around frames.
Those two situations look similar on a morning inspection but have different origins and different solutions. Describing what you see, rather than asserting what has failed, gives any qualified person who assesses the window a neutral starting point.
Recording when and where water is noticed
Timing is surprisingly informative. Keep a simple running log — the date, the approximate time of day, and whether it had been raining, heavily windy, cold overnight, or none of the above. Note whether the water appears:
- On the interior face of the glass
- On the frame (and which part — sill, head, jamb, or corner junction)
- On the wall surface directly below or beside the window
- On the floor or sill internally
- Between the panes, if the window is double-glazed
Also note whether the water seems to track along a path (suggesting it ran from somewhere above) or pools in one spot without an obvious source direction. If the problem only occurs during or immediately after rain — particularly wind-driven rain — record that. If it appears on still, cold mornings regardless of recent rainfall, record that too.
Collecting safe photographs and installation records
Photographs taken safely from inside the home are extremely useful. Aim for:
- A wide shot showing the whole window in context (wall type, surrounding finishes)
- A close-up of wherever you first notice wetness or staining
- Any water marks, discolouration or mould on adjacent wall lining, sill, or flooring
- The outside face of the window, if safely accessible from ground level
Do not lean out of windows or climb to reach external details — describe what you cannot safely photograph.
While you are gathering records, look for any documentation left after the window was installed. The AGWA Selection Guide notes that window assemblies should come with a compliance certificate showing the manufacturer’s identification, the serviceability limit state wind pressure, and the water penetration resistance. If you have an original WERS certificate, the AGWA energy rating resource confirms keeping that document is worthwhile because it records the specific make-up of the window. Any of these documents can help an assessor understand what performance the window was intended to deliver.
Questions about the proposed investigation
Before an assessment visit, it is reasonable to ask the person or company attending what their scope of investigation covers. Some useful questions to consider:
- Will they inspect both internal and external faces of the window?
- Do they look at the flashing and wall interface, or only the window unit itself?
- Will they form a written opinion, and in what form?
- If further trades are needed (for example, to access a concealed cavity), is that separate?
- Are they a licensed building work contractor in South Australia?
On that last point, SA.Gov.Au states that individuals and businesses must be licensed as building contractors if they run a business that carries out or organises building work for others or to sell or let land or buildings, and that all building work must be supervised by a registered building work supervisor. Whether a particular investigation or assessment visit constitutes “building work” requiring a contractor’s licence is a question worth raising directly with CBS or the person attending — the answer may depend on what the visit actually involves.
Hypothetical scenario: what good notes look like (illustrative only)
This is a hypothetical example to show the kind of detail that helps — not a customer story or a prediction of any outcome.
Imagine someone notices a damp patch on the internal plasterboard to the right of a sliding aluminium window, roughly 15 cm below the frame. It appears on two separate mornings after overnight rain with strong westerly winds, but not after still-weather rain, and not on cold dry mornings. They photograph the stain when fresh and again the following day when dry. They note that the wall is brick veneer, that the window was replaced three years ago, and that they cannot locate any paperwork from the installation.
That set of notes — location, pattern of occurrence, weather conditions, wall type, window history, available documentation — gives an assessor a much clearer picture than “water comes in around my window sometimes.” It does not assert whether the flashing, the frame seals, or the wall cavity is at fault. That determination belongs with whoever conducts the physical investigation.
Condensation versus water ingress: a distinction worth understanding
YourHome explains that condensation forms when humid air meets a cooler surface, and that it can lead to damp and mould in both visible and concealed locations. It also notes that the risk depends on climate, how the home is built, and how it is used — including activities such as cooking, showering, and drying clothes indoors.
If the water you notice is consistent in distribution across the glass surface, appears only on cold mornings, and dries away as the room warms, condensation is worth raising as a question with an assessor — even if it ultimately turns out that installation or sealing is also involved. What you should avoid is using visible moisture to diagnose the cause yourself, because the corrective path for each is different.
Comparing written findings and follow-up options
After any assessment, ask for findings in writing, distinguishing clearly between:
- What was observed (the physical evidence noted on the day)
- What was inferred or suspected (the assessor’s professional opinion of likely origin)
- What further investigation, if any, would be needed to confirm that opinion
- What remediation options were identified, and by whom they would need to be carried out
This distinction matters if more than one trade is involved, or if you need to compare one assessor’s view with another’s. A written record of observations also separates the factual picture from any interpretation — useful if a warranty question arises, though the nature and terms of any applicable warranty should be confirmed directly with the relevant supplier or installer rather than assumed.
If the finding points toward a window replacement or significant installation repair, related guides on the window replacement process in Adelaide and window measurement visit preparation may help you understand what comes next. For questions about the energy performance of replacement windows, see the WERS rating explained guide.
If you would like to explore whether a referral to a window assessor or supplier may be available for your situation, you are welcome to submit an enquiry and we will follow up where we can.
Further reading
- AGWA Guide to Residential Installation (Version 3), hosted by Southern Star Windows: southernstarwindows.com.au
- YourHome — Condensation: yourhome.gov.au
- SA.Gov.Au — Building work contractor’s licence: sa.gov.au
- AGWA Guide to Window and Door Selection: agwa.com.au